SHARS 6" 600DS Double Station CNC Milling Vise +/-0.0002". Quality You Can Count On. Jaw Opening (Double Station): 4.90. Jaw Opening (Single Station): 12.2. Bed Height: 3.25" +/-0.0005".Jaw Plate Threads Spacing: 3.875. Meet Our Most Accurate Vise: 600DS. Vise can clamp dissimilar sized parts with a repeatability of +/- 0.0002 in double station configuration while with the eccentric pin mechanism to prevent jaw lifting even in the most demanding manufacturing environment.
Can also be converted to a 12.25 opening single station vise to maximize the value of this vise. Vise has the tightest tolerance on key specifications such as clamping repeatability, bed height , parrallelism between bedway and base , and perpendicularity between jaw plate and bedway and improvement to prevent jaw lifting on movable jaws.
Unique leadscrew design provides ability to clamp either same sized parts or dissimilar sized parts, even if the difference between the two parts is as big as 4.9, while allowing 6 different jaw clamping configurations. Unlike other less expensive import vises, 600DS offers advanced improvements to prevent jaw lifting by using eccentric pin locking mechanism no matter if the vise is lay flat in normal fashion, on the side, or vertically upright in a tower vise configuration. Unique clamping force equalization mechanism allows same amount of clamping force applied evenly to different sized part when jaws starts tightening.By removing the middle fixed jaw, 600DS can be converted into a 12.25 capacity single station vise with the included converstion hardware kits. In this single station configuration, unlike other competitor's vise, 600DS's rear jaw close in towards the operator and able to close completely. Another hidden advantage with front jaw being fixed is that it allows CNC machine operator to program in Y axis positive direction. Vise body made from 80,000 PSI stress relieved ductile cast iron. Vise bed is hardened to 45 HRc and Jaw Plates flame hardened to 54 HRc. Precision ground flat sides allow the vise to be mounted on each side or in high density mounting system. Chip guard pre-installed on each vise.
Up to 6000 Lbs of clamping force. Bed height matched to 3.25" +/- 0.0005" (matched bed height on pair orders). Clamping repeatability within +/- 0.0002. Bed height tolerance of +/- 0.0005. Vises' bed parallel to base within 0.0005.
Fixed Jaw perpendicular to bed within 0.0005. Fixed jaw parallel to vise's keyway within +/- 0.0005. Vise Jaw Plate thread and spacing is compatible with other American made vise on the market. Footprint and distance from the keyway to stationary jaws meet the industry standard. Shars Tool warrants that this 600DS vise will be free from defects in material and/or workmanship for the life of the product.The life of the product or part is defined as that point in time when such item no longer functions due to normal wear and tear. And any product or part that has been, abused, heated, ground or otherwise altered, used for a purpose other than that for which it was intended, or used in a manner inconsistent with any instructions regarding its use. Polish Handle and extension leadscrew socket.
2 pc of 11/16 T-slot Keys. Four toe clamps with T-nuts for 11/16 T-slots. Conversion Kits (Jaw fixing plate & screws). The item "2Pcs 3/4'' Shank Canoe Flute and Bead Router Bit Cutter Woodworking Tool US 1CC" is in sale since Tuesday, April 20, 2010. This item is in the category "Business & Industrial\CNC, Metalworking & Manufacturing\Workholding & Toolholding\Workholding\Vises".The seller is "discount_machine" and is located in Saint Charles, Illinois. This item can be shipped to United States, Canada.